Overview on Organic and Inorganic Materials Used for Furniture and Its Decorations

Natural resources aided in the evolution of human existence on the planet. For almost 10,000 years, these materials have been in use. Furniture has been made out of raw wood or stone for…

Selected Coating Properties of Black Alder Wood as a Function of Surface Preparation, Varnish Type, Coating System and Exposure Conditions

On the market, solid wood furniture maintains its popularity. The key factors used to describe the overall quality of solid wood are reliability, environmental friendliness, appearance, and value. Black alder is one of…

An Ecological Approach for Recovery Residual Area of the Human Productive Activity: A Brief Study

Cities and their suburbs develop, expand, and replace natural lands with agricultural lands as urban populations grow. Land use changes as a result of urbanisation, changing the connection between human societies and natural…

Study on Decomposition and Transformation of Calcite-1 by Shearing at High Pressure

Transmission Calcite-1 was gently sheared at high pressure up to 16 GPa parallel to the (101) plane and in the [2-1-1] direction at room temperature, resulting in X-ray diffraction patterns on imaging plates….

Determining the Bulk Growth, Nucleation Kinetics, Optical and Spectral Analysis of Organic Nonlinear Material: 4-Chloroaniline (pCA) Single Crystal

The organic nonlinear optical material 4-chloroaniline was formed as a single crystal by slow cooling (pCA). The material solubility was determined via gravimetric analysis, and the metastable zonewidth MSZW was evaluated at various…

Investigation of Electrical, Acoustical and Optical Properties of Nanopowder Dispersed Cholesteric Liquid Crystal

Due to its unique features, such as improvement in different properties such as electrical, optical, thermal, energy storage, and spontaneous polarisation, composite materials based on nanopowder dispersed liquid crystals are essential both in…

A Detailed Review on the Properties and Applications of WO3 Nanostructure-Based Optical and Electronic Devices

Tungsten oxide (WO3) is a wide bandgap semiconductor with accidentally doped n-type, strong electrical conductivity, and high electron Hall mobility, making it a potential material for optoelectronic applications. Recent publications have included reviews…

Geotechnical Interattraction of Granites from Ouaddai Region (East) for Use in Civil Engineering

This research focuses on the various properties of granitic materials that can be used in construction in Chad’s eastern area. The towns of Achklun and Amgala are located in the north and south…

Study on Preparation and Characterization of Subsurface Silver Particulate Films on Polymer Blends of Polystyrene/Poly (2-Vinyl pyridine) /Poly (Vinylpyrollidone)/Poly (4-Vinyl pyridine)

In the last few decades, polymer nanocomposites have been an enormously growing topic of research for producing materials. When a little amount of nanosized particles is added to a polymer matrix, the polymer…

Study on Fruit Based Dye Sensitized Solar Cell

In the field of solar energy conversion, finding a cost-effective and environmentally acceptable solar cell is always a scientific problem. As a result, Dye Sensitized Solar Cells (DSSCs), which offer low-cost production and…

Assessment of Spectroscopic Characterization of Pure and Malachite Green Doped Polysulfone Samples by X-Ray Diffraction (XRD), UV- Visible and Scanning Electron Microscopy (SEM) Techniques

Polymers have strong dielectric properties when subjected to a field-temperature treatment because they may permanently store charge. The electret state and carrier mobility of polymers can be significantly changed by impregnating them with…

Study on 𝛾-Rays Irradiation Induced Structural and Morphological Changes in Copper Nanowires

The influence of -irradiations on the structural and morphological features of copper nanowires (Cu-NWs) at doses ranging from 6 to 25 kGy is discussed in this paper. Cu-NWs began welding at 9 kGy,…

Failure of Standard Duplex Stainless Steel X2CrNiMoN22-5-3 under Corrosion Fatigue in Geothermal Environment: A Recent Study

Corrosion fatigue has long been known to reduce the lifetime of high alloyed steels. X2CrNiMoN22-5-3 duplex stainless steel is a viable candidate for corrosion and mechanical stress resistance. As a result, the corrosion…

Determination of Response Statistics of Single Degree of Nonlinear Random Structure with Nonlinear Damping Characteristic and Nonlinear Elastic Characteristic

The applicability of the route integral solution approach for determining the response statistics of nonlinear dynamic systems whose equations of motion may be described using linearization differential equations is investigated in this work….

Thermo Catalytic Decomposition of Methane over Cu – Al2O3 and 5 – 20wt% Ni – Cu – Al2O3 Catalysts to Produce Hydrogen and Carbon Nanofibers: Experimental Investigation

Hydrogen is an environmentally beneficial fuel with the potential to reduce the use of fossil fuels greatly; yet, it faces numerous important difficulties before it can be widely adopted. TCD (thermo catalytic decomposition…

Study on Development of a Deformation Prediction System for 3D Printed Parts in Additive Manufacturing

SLM is a promising additive manufacturing (AM) process that has the ability to build practically any three-dimensional (3D) metallic item with complex structures. The thermal behaviour of metal powder during the SLM process…