Determination of Stress-strain State of the Interfacial Layer in a Whiskerized Fiber Composite with Longitudinal Shear

The effective properties of composite materials reinforced by whiskerized fibres are determined using a three-phase approach proposed in this study. The study considers a modified composite made up of two phases: a fibre…

Determining Effects of Ga and As Atom on the Optical Properties of Silicene: DFT Studies

These researches are looking at the effects of Ga and As dopants on the optical characteristics of silicene. Silicene, a silicon analogue of graphene, is projected to perform better in the electronics market…

Determination of Surface Modified CVD Diamond/ Si(111) Film Post Implanted Ion Fe-B and NiFe-B Related to Magnetoresistance Properties

STEM has been used to investigate the nanostructure of Fe-B and NiFe-B after implantation on CVD diamond/Si(111) films, as well as their Magnetoresistance(MR) phenomena. Two samples were extensively examined: the first is a…

A Brief Study on Potentiality of Fruit and Vegetable Waste by Anaerobic Co-digestion with Municipal Sewage Sludge and Biogas Yield

Co-digestion, which employs anaerobic digestion to treat two or more organic biodegradable waste streams, has a lot of promise for proper solid waste disposal. The anaerobic co-digestion of fruit and vegetable waste (FVW)…

Determination of Thermal Diffusive Properties of Silver and Copper

Copper is used extensively in electrical power transmission, plumbing, cookware, and other applications because it is the most abundant and least expensive of the noble and precious metals, such as copper (Cu) island…

Study of the Compressive Strength Characteristics of Cement Mortar Reinforced with Kenaf Fibre

Kenaf fibre is one of the various products derived from the kenaf plant, which is found in abundance in many places of the globe. The use of kenaf fibre to strengthen cement mortars…

Determination of a Linear Rule between the Osmotic Coefficients on Mole Fraction Base and Several Different Concentration Expressions in Single Electrolyte Solutions

In the paper, a linear rule between osmotic coefficients on mole fraction base and each of several concentration expressions is presented, respectively, in single electrolyte solutions containing various valence inorganic acids, alkalies, and…

Study on Nanophosphors with Partially Polymerized SiO4 Tetrahedra Produced by Evaporation of Ca2Y8(SiO4)6O2: Eu Polycrystals

Pulsed electron beam evaporation of micrometer-sized polycrystalline phosphors of the composition Ca2Y8(SiO4)6O2: Eu generated nanophosphors in the amorphous form for the first time. When particle size decreases from micro to nanodimensional, the Raman…

Structural and Electrical Studies on Blend Based Mixed Ion- electron Conductor- (PVA: PVK): CH3COONH4: EC System

The goal of this research is to create a mixed ion-electron conductor that can be used as an electrode in electrochemical devices. With this in mind, a preparation and characterization of the PVA:PVK:CH3COONH4:EC…

Study on Synthesis and Antibacterial Efficacy of Chloro-Substituted 1,3-Thiazines

Thiazines are valuable units in medicinal and pharmaceutical chemistry, with a wide range of biological activity described. This prompted us to use thiourea, phenyl thiourea, and diphenyl thiourea to make chloro-substituted thiazines from…

Investigation of Heavy Metal Bioaccumulation in the Nervous System, Skin and Skeletal Tissues of Wastewater-Fed Fish

In several countries throughout the world, treated municipal wastewater fish are used in fish farming. Due to harmful chemicals and microbiological pollution, it can be dangerous to fish and people who eat it….

Conducting Polymer/Metal Oxide Nanocomposite’s Morphology Dependence on MO Additive Weight Percent

Polyaniline Emeraldine salt (ES) and its composites with metal oxides V2O5, ZnO, and MgO were created utilising a chemical oxidation technique by combining various mass percents of metal oxides with monomer in a…

Study on Vibroacoustic Analysis of Marine Engine Supplied with Mixture of Fuels

Various viable possibilities such as biodiesel, hydrogen, alcohols, compressed natural gas (CNG), and liquefied petroleum gas (LPG) are being researched by top crude oil businesses (LPG). The main goal of this study is…

Study on Kinetics of Growth and Weight of Vanadium Gel on Short-Circuited Probes from Various Materials

The development of technical processes in the chemical and metallurgical industries has resulted in a considerable growth in research chemical systems with the goal of putting them into practise. The findings of investigations…

The Use of Statistical Methods to Evaluate the Quality of Finishing of Building Products and Construction

The goal of this project is to create guidelines for ensuring the quality of paints and varnishes used in construction products and structures. The utilisation of statistical methods for managing product quality when…

Experimental investigation on Geopolymer Fly Ash Building Brick by Atmospheric Curing

The present project’s goal is to create geopolymer fly ash building bricks that cure in the air. In the presence of sodium silicate and water, geopolymer building bricks are made with fly ash…