Synthesis and Characterization of Polyaniline/ CoxCr0.5-xFe2O4 Nanocomposites for ElS Applications

Polyaniline (PANI)/CoxCr0.5-xFe2O4(x=0, 0.1, 0.3) nanocomposites with good electromagnetic shielding efficiency were synthesised by in situ polymerization. PANI/ CoxCr0.5-xFe2O4(x=0, 0.1, 0.3) nanocomposites were investigated using X-ray diffraction, Field emission scanning electron microscopy, and Vibrating…

Assessment of Spectroscopic Characterization of Pure and Malachite Green Doped Polysulfone Samples by X-Ray Diffraction (XRD), UV- Visible and Scanning Electron Microscopy (SEM) Techniques

Polymers have strong dielectric properties when subjected to a field-temperature treatment because they may permanently store charge. The electret state and carrier mobility of polymers can be significantly changed by impregnating them with…

Determining the Effect of O2-partial Pressure on the Physical Properties of DC-magnetron Sputtered Cadmium Zinc Oxide thin Films

Solar cells and optoelectronic devices use Cd-doped ZnO in a variety of ways. To create Cd-doped ZnO thin films, researchers employed reactive dc magnetron sputtering on a glass substrate at various O2 partial…

Study on Crystal Growth and Characterization of an Organic Nonlinear Optical Material: An Approach to L-histidinium Maleate (LHM)

L-histidinium maleate, a new amino acid organic nonlinear optical material, was successfully produced from aqueous solution using a slow solvent evaporation approach in this study. Single crystal X-ray diffraction analysis was used to…

Determination of Anti-bacterial Effect, Anti- odour Effect, uv- protection Factor and XRD on Formic Acid Treated Modal and Cotton Fabric

Modal is created from the spun regenerated cellulose polymer of beech trees and is bio-based rather than natural. Modal is a second-generation regenerated cellulosic fibre and a rayon variation. They’re tough and long-lasting,…

Effect of Noble Metals (Ag, Au, Pt, Pd) loading over the Semiconducting p-NiO/ n-MoO3 Nanocomposite for Development of Green-House Gas Sensor

In light of the health risks linked with hazardous gases associated with industrial and car exhausts, global awareness of health and the environment is fast expanding. As a result, gas sensors are required…

Study on Combustion Synthesis of LSGM Nano Powders for Solid Oxide Fuel Cell Electrolytes

The powder of Lanthanum Strontium Magnesium Gallate, La0.8Sr0.2Ga0.8Mg0.2O3 (LSGM), was produced using the glycine nitrate method, and we present our findings. Thermogravimetry (TGA), Fourier transform infrared spectra (FTIR), X-ray diffractometry (XRD), and scanning…

Study on Synthesis of Nano-Crystalline Ba0.5Sr 0.5Co 0.8Fe 0.2O3 Cathode Material by Glycine-Nitrate Combustion Process for Solid Oxide Fuel Cells

  Nano ceramics comprising Ba0.5Sr0.5Co0.8Fe0.2O3 (BSCF) powders have been manufactured for solid oxide fuel cells (SOFC) applications utilising a glycine-nitrate combustion process and metal nitrate-based chemicals, as these powders are believed to be…

Investigating the Effect of Annealing on the Properties of Cu2SnS3 Thin Films Using Spin Coating

Copper Tin Sulphide is a good material for thin film hetero-junction solar cells because of its electrical and optical properties. It’s a p-type ternary direct band gap material with a lot of thin-film…

Investigation on L-Histidinium Maleate 1.5-Hydrate Crystals for Nonlinear Frequency Conversion

A novel amino acid organic nonlinear optical (NLO) material, L-histidinium maleate 1.5-hydrate (LHM), was produced from aqueous solution using a slow solvent evaporation process at ambient temperature. The compound’s solubility in aqueous solution…

Removal of Sr (II) Metal Ions from Aqueous Solution by Using Natural Zeolite and It’s Na-Zeolite Derivative

Stilbite (Natural Zeolite), Na-Zeolite, and Sr(II) metal ions are exchanged with Sr(II) metal ions in this study to investigate the removal of heavy metal ions from industrial waste water. Inductive Coupled Plasma-Atomic Emission…

The Impact of Crystal Growth Temperature on Zr Reach Crystalline Phase Formation in a Nuclear Waste Confinement Glass Ceramic

To contain radioactive waste, a variety of glass ceramics could be employed. Glasses containing radiation-resistant ceramics like zirconolites, pyrochlores, or pyroxenes are an example. The influence of crystal growth temperature on the development…

Preparation, Physical and Electrochemical Characterization of Nickel Cobaltites, NixCo3-xO4 (0 ≤ x ≤ 2.5): A Recent Study

Mixed oxides of spinel type NixCo3-xO4 with 0 ≤ x ≤ 2.5 have been synthesized via several methods. We used X-ray diffraction, the Brunauer-Emmett-Teller process, and scanning electron microscopy to look into their…